|
|
|
|
|
|
 |
|
 |
|
CT Twin Screw Extruders are the closely intermeshing co-rotating extruder. CT Twin Screw Extruder mostly used for continuous compounding of polymers. Other applications can be processed through CT Twin Screw Extruder, i.e. fiber-filled polymers, de-gassing polymers, reactive blending, direct-expanded snack food, pasta, third-generation food pellet, starch modifications, etc . The screw elements are modular which can be easily change screw configuration or replace the worn-out screw element. The barrels can be selected to modular type or clam-shell type.
|
|
CT Twin Screw Extruder:
• CT Twin Screw Extruder can be
equipped with relevant auxiliary
accessories i.e. die head and speed-
adjustable cutter for producing various
products.
• The structure of machine is specifically
designed according to processing material
and technology.
• CT makes screws and barrels in various
geometries and L/D ratios.
• CT can supply screws and barrels from
many based materials, i.e. nitrided steel,
chromium plating, tool steel, stainless
steel, etc.
|
Twin-Screw Extruder |
|
|
|
CT Single Screw Extruder is mostly used for continuous shaping material through the extruder die. This shape generally changes to some extent as the material exits from the die. Many different materials can be formed through CT Single Screw Extruder, i.e. thermoplastics, thermosets, rubbers, and food products. To improve the mixing efficiency, mixing screw element and grooved barrel may be used instead of regular screw and barrel. |
|
CT Single Screw Extruder:
• CT Single Screw Extruder can be
equipped with relevant auxiliary
accessories i.e. die head and
speed- adjustable cutter for
producing various products.
• The structure of machine is
specifically designed according to
processing material and technology.
• CT makes screws and barrels in
various geometries and L/D ratios.
• CT can supply screws and barrels from
many based materials, i.e. nitrided
steel, chromium plating, tool steel,
stainless steel, etc.
|
Single-Screw Extruder |
|
|
CT Filter Pressure Value Tester follows the standard DIN EN 13900-5 to determine the Filter Pressure Value (FPV). CT Filter Pressure Value Tester can be used for polymer compounding development, color masterbatch process, and quality control / assurance.
CT Filter Pressure Value Tester consists of
- CT Single Screw Extruder
- CT Gear Pump
- CT Pressure Monitoring Program
|
|
|
 |
CT Filter Pressure Value Tester:
- CT Filter Pressure Value Tester with an
advanced design
- The machine is installed with an electrical
control panel.
- Easy to control
- Smooth running
- Low cost
- Long service life |
|
|
Filter Pressure Value Tester |
|
 |
|
 |
|
|
 |
|
 |
|
CT Internal Mixer used for mixing or compounding and plastics. The mixer is for preparing plastic or rubber formulations by mixing or/and blending polymers and additives in a molten state. There are different factors to achieve a homogenous blend of the different raw materials. User can select mixing rotor types to change the degree of dispersive and distributive mixings.
|
CT Internal Mixer is a machine for melt blending that involves the intimate mixing of polymer and additives or between different kinds of polymers over a wide range of shear rates and temperatures. Obtaining the well dispersion, polymer compounds and polymer composites are the proper products to the successful finalfabrication.
|

|
|
CT Internal Mixer is suitable for many applications:
• Polymer and/or rubber compound.
• Polymer and/or rubber composite.
• Polymer and/or rubber blend.
• Food and Food product i.e. starch
modification.
CT Internal Mixer can be made upon your requirements:
• Any mixing capacity can be
manufactured by CT from small
size used in laboratory to big size in
plant.
• We can supply custom rotor design
for the specific application.
• We will recommend the suitable
material or combination of materials
for your application.
|
Internal Mixer |
|
|
|
|
 |
|
 |
|
|
 |
|
 |
|
CT Compression Molding Machine or CT hydraulic press, is for polymeric shaping in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, and heat and pressure are maintained until the molding material has cured in the case of rubber compound. The process employs thermosetting resins in a partially cured stage, either in the form of granules, putty-like masses, or preforms. CT Compression Molding Machine is a high-volume, high-pressure equipment suitable for molding complex, high-strength fiberglass reinforcements. Advanced composite thermoplastics can also be compression molded with unidirectional tapes, woven fabrics, randomly orientated fiber mat or chopped strand. The advantage of CT Compression Molding Machine is its ability to mold large, fairly intricate parts. CT Compression Molding Machine produces fewer knit lines and less fiber-length degradation than injection molding machine.
|
CT Compression Molding Process consists of hydraulic oil tank, hydraulic power unit, hydraulic pump, hydraulic control system, pressure switch, pressure guage, relief valve, hydraulic cylinder, control panel, temperature controller, mould, cavity mold, press lever, heating platen, and cooling platen. |
|
CT Compression Molding Machine:
• Compression molding machine with the
advanced design
• Easy to control
• Suitable for plastic and/or rubber
• Pressure adjustment by electrical pressure
switch.
• Electrical valves to control up-down
directions of compression plate.
• The hydraulic components are easily
accessible for quick maintenance.
• Safety valve for over-pressure protection.
• Safety door for user protection.
• Pressure releasing system in the case
of electrical power failure.
• Pressure holding system to extend
pressure pump life-time and to save energy.
• Low cost
• Long service life
|
Compression Molding Machine |
|
|
|
 |
|
 |
|
|
 |
|
 |
|
|
CT Colloid Mill is an equipment suitable for:
• reducing the particle size of particulate in dispersion liquid
• mixing immiscible liquids with emulsifier
• preparation of chemical dispersion
• preparation of color pigment dispersion
CT Colloid Mill:
• Lab-scale mill with an advanced design
• Smooth running
• Adjustable rotor speed
• CT Colloid Mill can be equipped with relevant auxiliary
accessories i.e. screen filter, circulating pipeline for batch
milling, and jacketed vessel for temperature control.
• The special bearings and seals are specifically designed
to maximize working life.
• Easy to control
• High output
• Low cost
• Long service life
Choices in Rotors and Stators:
• CT makes a wide range of rotors and stators for different
condition severities.
• CT can supply rotors and stators from many based materials
i.e. stainless, nitrided steel, tool steel, or high-speed steel.
• Segmented rotors and stators are also available.
|
Colloid Mill |
|
|
|
 |
|
 |
|
|
 |
|
|
 |
|
CT Two-Roll Mill can be used in many applications:
• Rubber sheeting for block rubber laboratory
• Rubber compounding for rubber product industry
• Rubber sheeting / calendering for rubber industry
• Plastic compounding / PVC compounding for plastic industry
• Color masterbatch preparation for rubber and plastic industry
• Expanded snack cracking / milling / grinding for food industry
|
|
|
|
CT Two-Roll Mill:
• CT Two-Roll Mill with an advanced design
• CT Two-Roll Mill consists of two rolls made of
steel with hard chrome plating.
• Both rolls run at a fixed speed and a constant
friction ratio.
• The machine is installed with an electrical
control panel.
• The machine consists of spur gears to transmit
the driving power from one roll to another roll.
• Adjustable roll speed and adjustable friction
ratio are available.
• CT Two-Roll Mill can be equipped with
CT heating/cooling unit.
• Easy to control
• Smooth running
• Low cost
• Safety functions
• Long service life
|
The safety of CT Two-Roll Mill:
Safety is a fundamental feature of this machine. Safety knee stopping bars are mounted under the rolls which can be reached easily in the case of emergency stop. Safety screens cover both rolls to protect hands and fingers of operator. The machine also has others safety equipments, such as hand stops, emergency stop switch, overload cut-out equipment, and roll reverse-direction switch.
|
|
|
|
|
 |
|
|
 |
 |
|
|
 |
|
|
|
|
CT Intermesh Mixer used for mixing or compounding and additives or thermoplastic elastomer
blending. There are different factors to achieve a homogenous blend of the different raw materials.
The intermeshing rotors provide both shear and extensional flows to obtain good dispersive and
distributive mixings which directly effect the product properties.
|
CT Intermesh Mixer is suitable for many
applications:
• Rubber Compounding
• Thermoplastic Elastomer Preparation
• Rubber Blending
• Food and Food Product i.e. Starch
Modification
CT Intermesh Mixer can be made upon your
requirements:
•Any mixing capacity can be manufactured by
CT from small size used in laboratory to big
size in plant.
•We can supply custom rotor design for the
specific application.
•We will recommend the suitable material or
combination of materials for your application.
|
Intermesh Mixer
|
|
|
|
 |
|
|
 |
|
|
|
|
|